Power Starlink Gen 3 from your vehicle — No Inverter, No Wiring Needed
Enjoy seamless off-grid internet with the Starlink Gen 3 – Anderson Plug 12 Volt Power Supply Converter, designed to power your Starlink router directly from a 12V vehicle socket. Whether you’re camped in the outback, travelling in your 4WD, or managing a rural property, this rugged converter delivers stable, high-voltage output; all from your car, caravan, or any auxiliary power setup.
This all-in-one solution features a 12V Anderson plug, an inline fuse, and a built-in 2-metre DC-to-DC cable that plugs directly into your Starlink Gen 3 router. No hardwiring, no bulky inverters, just plug in and connect.
⚙️ Key Features
🔌 12V to 56V Step-Up Converter
Transforms standard 12V vehicle power into the 56V required by Starlink Gen 3, eliminating power instability and voltage dropouts.
🚙 Plug & Play with Anderson Plug
Includes a 30cm lead with a standard Anderson plug and inline fuse, and 2 metre DC-to-DC cable, fast, easy setup with no tools or wiring.
📡 Optimised for Starlink Gen 3
Compatible with the newest Starlink Gen 3 router, delivering reliable internet connectivity in remote and mobile environments.
💦 IP67 Water-Resistant, Dustproof & Rugged
Sealed aluminium alloy case with shock-resistant design handles heat, dust, rain, and vibration; built for tough Aussie conditions.
🧩 Compact & Tidy Setup
Low-profile design integrates easily with vehicle interiors and auxiliary battery compartments.
🎮 Optional Wireless Remote Control (Variant)
Choose the remote version to turn your Starlink on or off at the press of a button, ideal for caravans, 4WDs, and camper setups.
- Includes 2 wireless key fob remotes
- Separate ON/OFF buttons (interlock mode)
- Switches power on the 12V side before the booster
- Reduces idle battery drain when not in use
- Receiver pre-wired and ready to go
📌Note: The booster remains waterproof and dust-resistant. The remote receiver module should be installed in a protected, dry location inside the vehicle or canopy.
✅ Keep your Starlink Gen 3 powered wherever your adventures take you — with clean, consistent power right from your vehicle’s 12V system.
🔧 Specifications
-
Input Voltage: 12V DC (via Anderson plug)
-
Output Voltage: 56V DC
-
Rated Draw: ~4.0A (once Starlink Gen 3 is running)
-
Fuse: 15A inline
-
DC Cable Length: 2.0 metres
-
Input Cable Length: 30 centimetres
-
Connector: Compatible with Starlink Gen 3
-
Application: 4WDs, caravans, off-grid setups, mobile internet systems
-
Operating Conditions: Dust-resistant, water-resistant, heat-tolerant, vibration-proof
-
Remote Variant (if selected):
- Max Load Current: 30A
- Voltage Range: 8–86V DC
- Remotes Included: 2
- Switch Type: Wireless ON/OFF (interlock mode)
📌 Note: This unit is designed for Starlink Gen 3 only. Not compatible with Starlink Mini or previous Gen 2 dishy models.